Arrays
An array is a container object that holds a fixed number of values of a single type. The length of an array is established when the array is created. After creation, its length is fixed. You have seen an example of arrays already, in the main method of the «Hello World!» application. This section discusses arrays in greater detail.
Each item in an array is called an element, and each element is accessed by its numerical index. As shown in the preceding illustration, numbering begins with 0. The 9th element, for example, would therefore be accessed at index 8.
The following program, ArrayDemo , creates an array of integers, puts some values in the array, and prints each value to standard output.
The output from this program is:
Element at index 0: 100 Element at index 1: 200 Element at index 2: 300 Element at index 3: 400 Element at index 4: 500 Element at index 5: 600 Element at index 6: 700 Element at index 7: 800 Element at index 8: 900 Element at index 9: 1000
In a real-world programming situation, you would probably use one of the supported looping constructs to iterate through each element of the array, rather than write each line individually as in the preceding example. However, the example clearly illustrates the array syntax. You will learn about the various looping constructs ( for , while , and do-while ) in the Control Flow section.
Declaring a Variable to Refer to an Array
The preceding program declares an array (named anArray ) with the following line of code:
// declares an array of integers int[] anArray;
Like declarations for variables of other types, an array declaration has two components: the array’s type and the array’s name. An array’s type is written as type[] , where type is the data type of the contained elements; the brackets are special symbols indicating that this variable holds an array. The size of the array is not part of its type (which is why the brackets are empty). An array’s name can be anything you want, provided that it follows the rules and conventions as previously discussed in the naming section. As with variables of other types, the declaration does not actually create an array; it simply tells the compiler that this variable will hold an array of the specified type.
Similarly, you can declare arrays of other types:
byte[] anArrayOfBytes; short[] anArrayOfShorts; long[] anArrayOfLongs; float[] anArrayOfFloats; double[] anArrayOfDoubles; boolean[] anArrayOfBooleans; char[] anArrayOfChars; String[] anArrayOfStrings;
You can also place the brackets after the array’s name:
// this form is discouraged float anArrayOfFloats[];
However, convention discourages this form; the brackets identify the array type and should appear with the type designation.
Creating, Initializing, and Accessing an Array
One way to create an array is with the new operator. The next statement in the ArrayDemo program allocates an array with enough memory for 10 integer elements and assigns the array to the anArray variable.
// create an array of integers anArray = new int[10];
If this statement is missing, then the compiler prints an error like the following, and compilation fails:
ArrayDemo.java:4: Variable anArray may not have been initialized.
The next few lines assign values to each element of the array:
anArray[0] = 100; // initialize first element anArray[1] = 200; // initialize second element anArray[2] = 300; // and so forth
Each array element is accessed by its numerical index:
System.out.println("Element 1 at index 0: " + anArray[0]); System.out.println("Element 2 at index 1: " + anArray[1]); System.out.println("Element 3 at index 2: " + anArray[2]);
Alternatively, you can use the shortcut syntax to create and initialize an array:
Here the length of the array is determined by the number of values provided between braces and separated by commas.
You can also declare an array of arrays (also known as a multidimensional array) by using two or more sets of brackets, such as String[][] names . Each element, therefore, must be accessed by a corresponding number of index values.
In the Java programming language, a multidimensional array is an array whose components are themselves arrays. This is unlike arrays in C or Fortran. A consequence of this is that the rows are allowed to vary in length, as shown in the following MultiDimArrayDemo program:
class MultiDimArrayDemo < public static void main(String[] args) < String[][] names = < , >; // Mr. Smith System.out.println(names[0][0] + names[1][0]); // Ms. Jones System.out.println(names[0][2] + names[1][1]); > >
The output from this program is:
Finally, you can use the built-in length property to determine the size of any array. The following code prints the array’s size to standard output:
System.out.println(anArray.length);
Copying Arrays
The System class has an arraycopy method that you can use to efficiently copy data from one array into another:
public static void arraycopy(Object src, int srcPos, Object dest, int destPos, int length)
The two Object arguments specify the array to copy from and the array to copy to. The three int arguments specify the starting position in the source array, the starting position in the destination array, and the number of array elements to copy.
The following program, ArrayCopyDemo , declares an array of String elements. It uses the System.arraycopy method to copy a subsequence of array components into a second array:
class ArrayCopyDemo < public static void main(String[] args) < String[] copyFrom = < "Affogato", "Americano", "Cappuccino", "Corretto", "Cortado", "Doppio", "Espresso", "Frappucino", "Freddo", "Lungo", "Macchiato", "Marocchino", "Ristretto" >; String[] copyTo = new String[7]; System.arraycopy(copyFrom, 2, copyTo, 0, 7); for (String coffee : copyTo) < System.out.print(coffee + " "); >> >
The output from this program is:
Cappuccino Corretto Cortado Doppio Espresso Frappucino Freddo
Array Manipulations
Arrays are a powerful and useful concept used in programming. Java SE provides methods to perform some of the most common manipulations related to arrays. For instance, the ArrayCopyDemo example uses the arraycopy method of the System class instead of manually iterating through the elements of the source array and placing each one into the destination array. This is performed behind the scenes, enabling the developer to use just one line of code to call the method.
For your convenience, Java SE provides several methods for performing array manipulations (common tasks, such as copying, sorting and searching arrays) in the java.util.Arrays class. For instance, the previous example can be modified to use the copyOfRange method of the java.util.Arrays class, as you can see in the ArrayCopyOfDemo example. The difference is that using the copyOfRange method does not require you to create the destination array before calling the method, because the destination array is returned by the method:
class ArrayCopyOfDemo < public static void main(String[] args) < String[] copyFrom = < "Affogato", "Americano", "Cappuccino", "Corretto", "Cortado", "Doppio", "Espresso", "Frappucino", "Freddo", "Lungo", "Macchiato", "Marocchino", "Ristretto" >; String[] copyTo = java.util.Arrays.copyOfRange(copyFrom, 2, 9); for (String coffee : copyTo) < System.out.print(coffee + " "); >> >
As you can see, the output from this program is the same, although it requires fewer lines of code. Note that the second parameter of the copyOfRange method is the initial index of the range to be copied, inclusively, while the third parameter is the final index of the range to be copied, exclusively. In this example, the range to be copied does not include the array element at index 9 (which contains the string Lungo ).
Some other useful operations provided by methods in the java.util.Arrays class are:
- Searching an array for a specific value to get the index at which it is placed (the binarySearch method).
- Comparing two arrays to determine if they are equal or not (the equals method).
- Filling an array to place a specific value at each index (the fill method).
- Sorting an array into ascending order. This can be done either sequentially, using the sort method, or concurrently, using the parallelSort method introduced in Java SE 8. Parallel sorting of large arrays on multiprocessor systems is faster than sequential array sorting.
- Creating a stream that uses an array as its source (the stream method). For example, the following statement prints the contents of the copyTo array in the same way as in the previous example:
java.util.Arrays.stream(copyTo).map(coffee -> coffee + " ").forEach(System.out::print);
System.out.println(java.util.Arrays.toString(copyTo));
[Cappuccino, Corretto, Cortado, Doppio, Espresso, Frappucino, Freddo]
Arrays in Java
Array in java is a group of like-typed variables referred to by a common name. Arrays in Java work differently than they do in C/C++. Following are some important points about Java arrays.
- In Java, all arrays are dynamically allocated. (discussed below)
- Arrays are stored in contiguous memory [consecutive memory locations].
- Since arrays are objects in Java, we can find their length using the object property length. This is different from C/C++, where we find length using sizeof.
- A Java array variable can also be declared like other variables with [] after the data type.
- The variables in the array are ordered, and each has an index beginning with 0.
- Java array can also be used as a static field, a local variable, or a method parameter.
- The size of an array must be specified by int or short value and not long.
- The direct superclass of an array type is Object.
- Every array type implements the interfaces Cloneable and java.io.Serializable.
- This storage of arrays helps us randomly access the elements of an array [Support Random Access].
- The size of the array cannot be altered(once initialized). However, an array reference can be made to point to another array.
An array can contain primitives (int, char, etc.) and object (or non-primitive) references of a class depending on the definition of the array. In the case of primitive data types, the actual values are stored in contiguous memory locations. In the case of class objects, the actual objects are stored in a heap segment.
Creating, initializing, and accessing an Array
One-Dimensional Arrays:
The general form of a one-dimensional array declaration is
type var-name[]; OR type[] var-name;
An array declaration has two components: the type and the name. type declares the element type of the array. The element type determines the data type of each element that comprises the array. Like an array of integers, we can also create an array of other primitive data types like char, float, double, etc., or user-defined data types (objects of a class). Thus, the element type for the array determines what type of data the array will hold.
// both are valid declarations int intArray[]; or int[] intArray; byte byteArray[]; short shortsArray[]; boolean booleanArray[]; long longArray[]; float floatArray[]; double doubleArray[]; char charArray[]; // an array of references to objects of // the class MyClass (a class created by // user) MyClass myClassArray[]; Object[] ao, // array of Object Collection[] ca; // array of Collection // of unknown type
Although the first declaration establishes that int Array is an array variable, no actual array exists. It merely tells the compiler that this variable (int Array) will hold an array of the integer type. To link int Array with an actual, physical array of integers, you must allocate one using new and assign it to int Array.
Instantiating an Array in Java
When an array is declared, only a reference of an array is created. To create or give memory to the array, you create an array like this: The general form of new as it applies to one-dimensional arrays appears as follows:
Here, type specifies the type of data being allocated, size determines the number of elements in the array, and var-name is the name of the array variable that is linked to the array. To use new to allocate an array, you must specify the type and number of elements to allocate.
int intArray[]; //declaring array intArray = new int[20]; // allocating memory to array
int[] intArray = new int[20]; // combining both statements in one
Note:
The elements in the array allocated by new will automatically be initialized to zero (for numeric types), false (for boolean), or null (for reference types). Do refer to default array values in Java.
Obtaining an array is a two-step process. First, you must declare a variable of the desired array type. Second, you must allocate the memory to hold the array, using new, and assign it to the array variable. Thus, in Java, all arrays are dynamically allocated.
Array Literal
In a situation where the size of the array and variables of the array are already known, array literals can be used.
int[] intArray = new int[]< 1,2,3,4,5,6,7,8,9,10 >; // Declaring array literal
- The length of this array determines the length of the created array.
- There is no need to write the new int[] part in the latest versions of Java.
Accessing Java Array Elements using for Loop
Each element in the array is accessed via its index. The index begins with 0 and ends at (total array size)-1. All the elements of array can be accessed using Java for Loop.
// accessing the elements of the specified array for (int i = 0; i < arr.length; i++) System.out.println("Element at index " + i + " : "+ arr[i]);
Implementation: