Php not running in browser

Php file not running in browser

Solution 2: In my case PHP cli was working on ec2 ubuntu instance and as you said browser just prints source code instead of executing it I have run from 3rd line (install php) and that fixed my issue Ref: http://fredericpaladin.com/kb/aws-ec2-instance-with-ubuntu-apache2-web-server/ Question: I’ve installed Apache, PHP and MySQL with no errors and I can run the PHP program from the command prompt. I’ve installed PHP and the table in mysql is fine (i have repleaced db name etc with my actual credentials.

PHP on EC2 is just printing out my PHP file and not executing

I have this as my index.php on a basic EC2 instance.

query("SELECT message FROM test"); $row = $result->fetch_assoc(); echo $row['message']; ?> 

When I visit my public DNS I get this:

query("SELECT message FROM test"); $row = $result->fetch_assoc(); echo $row['message']; ?> 

I’ve installed PHP and the table in mysql is fine (i have repleaced db name etc with my actual credentials.

You have either installed php incorrectly or failed to restart your web server after installing it. If it’s apache, try this:

It doesn’t have anything to do with your mysql config — php is not trying to execute the script at all.

In my case PHP cli was working on ec2 ubuntu instance and as you said browser just prints source code instead of executing it

sudo apt-get update sudo apt-get install apache2 sudo apt-get install libapache2-mod-php php sudo apt-get install mysql-server php-mysql sudo service apache2 restart 

I have run from 3rd line (install php) and that fixed my issue

How to get PHP script to run in browser?, PHP script not running on browser. I’m trying to work with PHP and am very new at it. I’m trying to just test the waters with a simple hello world program. I’ve tried it like this: As an HTML file, and then running the …

This page is not working in chrome /Firefox browser

This page is not working in chrome /Firefox browser , php .php file not working/opening/ running Html form data not sending to …

PHP not running in the browser, works fine from the command line

I’ve installed Apache, PHP and MySQL with no errors and I can run the PHP program from the command prompt.

But, I can’t get a PHP page to display in the browser.

When I try to view a PHP page in Google Chrome, I get this error:

Oops! This link appears to be broken

Whereas a blank webpage appears in Mozilla Firefox.

Can you please suggest a solution to this?

Please don’t just say that I should check the Apache/PHP configuration. If that is your answer, please also suggest what exactly should I be checking there.

• Check the access log recorded by the web server (to make sure the request is being received)
• Check the error log recorded by the web server (to see what the server said went wrong)
• Use something like Charles or Firebug to examine the HTTP request and response in detail (so you know exactly what is being requested (and can match it to what you expect) and what the response is)

They should give you enough information to identify the problem.

Open httpd.conf file and in section add this:

AddType application/x-httpd-php .php AddType application/x-httpd-php-source .phps 

Then restart your apache server and test again the your page if its display correctly.

I think you aren’t using true folder to serve for your pages. If you put your pages true Apache Server’s folder ( like /var/www ) , you can see pages. Maybe your php pages don’t work, but you have to see your codes in your php file.

My PHP file doesn’t execute in the browser, Are you sure you have php enabled on your server? create a new file called test.php and place the content inside below: – Gokhan Dilek Mar 29, 2015 at 6:11

PHP file not running in CRON/CLI

I have to run a php file every 5 seconds , and have two issues 1. The file works perfectly when opened in a browser, but running the ‘php myfile.php’ command fails and produces the following error

 PHP Warning: include_once(../tutadmin/config/config.php): failed to open stream: No such file or directory in /var/www/html/cron/teacher_status_cron.php on line 3 PHP Warning: include_once(): Failed opening '../tutadmin/config/config.php' for inclusion (include_path='.:/usr/share/php') in /var/www/html/cron/teacher_status_cron.php on line 3 PHP Notice: Use of undefined constant TBL_USER - assumed 'TBL_USER' in /var/www/html/cron/teacher_status_cron.php on line 5 PHP Notice: Use of undefined constant TEACHER_USER_GROUP_ID - assumed 'TEACHER_USER_GROUP_ID' in /var/www/html/cron/teacher_status_cron.php on line 9 PHP Notice: Undefined variable: current_user_id in /var/www/html/cron/teacher_status_cron.php on line 14 PHP Notice: Undefined variable: current_date_time in /var/www/html/cron/teacher_status_cron.php on line 15 PHP Notice: Undefined variable: dbc in /var/www/html/cron/teacher_status_cron.php on line 20 PHP Fatal error: Uncaught Error: Call to a member function Query() on null in /var/www/html/cron/teacher_status_cron.php:20 Stack trace: #0 thrown in /var/www/html/cron/teacher_status_cron.php on line 20 

Edit: the file does not work outside of cron in the CLI either, only on a web browser.. Cron is not the issue.

Because you have not right permissions on file, your cron can not open file, change permissions.

PHP script not running on browser, But after installation, when I run any php script on the browser it does not run. I do not see any ouput. No checking the phpinfo() from local host I see that version 5.3.5 is installed Even when running a a simple php file like where I echo a line; I do not see anything on my browser. So, my question is do I need to …

Источник

PHP works on command line but not in browser

When I run a basic ‘hello world’ php script from the command line, running the command php test.php , it returns a valid html page. However, when I try to access it by a browser, I get the text of the php script returned, rather than valid html. The php script «test.php» is as follows:

2 Answers 2

PHP may run in different modes of operation.

It can be console interpreter when you run it from command prompt, or it can run as CGI, also can run as a service — php-fpm , it can run as apache’s module or it can be a web server itself.

The simplest way to run your php scripts in browser it use its embedded web server.
Just run php -S ip.ip.ip.ip:port -t /path/to/directory/where/php/files/lives substitute ip.ip.ip.ip with IP address assigned to Raspberry Pi (get it from ifconfig ) and substitute port with port you want embedded server will listen for connection (let it be 8000). If you point your browser to http://ip.ip.ip.ip:port/your-script.php you will get what you want without need to run apache at all.

If you still want to run php via apache, you need to figure out how did you install it.

Steps to check if php should run as apache module:
Run apache2ctl -M and look if php module loaded. If it isn’t there then you need to enable it sudo a2enmod phpX (where X is php version) and reload apache with command:
sudo service apache2 reload .

Steps to check if php should run as php-fpm service:
If you install php as php-fpm service then you need to check if it is running :
ps aux | grep ‘php-fpm’
If it running then you need configure your apache instance to work as proxy. Use official apache documentation to set it up. It is more complicated setup to compare with a case when php runs as apache module but it has many advantages that usually need in production environment.

Steps to check if php should run as php-cgi (in this mode php called by apache every time when someone request php file ):
Check apache’s config file(s) for the presence following settings:

ScriptAlias /local-bin /usr/bin AddHandler application/x-httpd-php5 php Action application/x-httpd-php5 /local-bin/php-cgi 

Источник

Php why is php not loading in browser

Your Apache installation is not configured to use PHP to process files. Solution 1: Use following PHP header at the top of the PHP Code ie. Solution 2: Instead of using a meta tag to declare encoding, try using a standard doctype like Solution 1: Wow.

Php not running on browser

Obviously you are missing something. Try this manual: http://blog.sudobits.com/2011/10/28/how-to-install-lamp-apache-mysql-php-on-ubuntu-11-10/

You have one of two problems:

• (More likely) Your php.ini file has short_open_tag disabled, and will not interpret the short form of the PHP open tag
• Your Apache installation is not configured to use PHP to process .php files. You need to, at a minimum, ensure this line is present httpd.conf :

AddType application/x-httpd-php .php

There will also probably be other configuration needed in Apache, depending on how you are running PHP — the link provided by Sergei Tulentsev should help you determine if this is the case.

you can’t open a php file like a html one (i.e. double clicking) it must be in your DocumentRoot and you go there in your browser usually localhost/mypage.php. Check apache’s httpd.conf file for where it has the document root set move your file there and go to the afformentioned address.

PHP file opens in browser instead of running, Try adding this to .htaccess file where your PHP file is located AddHandler application/x-httpd-php .php If it does not work, that mean you do not have PHP installed on your apache server. Contact your hosting provider. EDIT: You need to have apache server with PHP module installed in order to run PHP files.

Why is PHP page not displaying in browser? [duplicate]

Use following PHP header at the top of the PHP Code

header('Content-type: text/html; charset=utf-8'); 

Instead of using a meta tag to declare encoding, try using a standard doctype like

Html — php web page not loading, I am not an expert but I am no noob at PHP, yet for whatever reason I am stomped as to why my document will not load. Here is my code. < Here is my code.

PHP code not being rendered in browsers

Wow. Okay, so to diagnose it I copied the code in the file and then deleted manage.php altogether.

I then created a new file using the Windows Explorer GUI (the ‘normal’ way) called manage.php and pasted the code.

Before I had created manage.php with Windows PowerShell using

new-item -type file manage.php 

I have had similar problems where the encoding of PowerShell is not UTF-8 but Big-Endian or something and it. simply put, messes with things. I suppose this is a rare problem but a good lesson in diagnosing problems.

This is definitely not a browser issue: it’s an environmental one. Something in WAMP is not set up to execute this page as a PHP script.

If what you are saying is true, that other *.php files run without a problem, my assumption would be that the encoding you are saving the file in is causing the problem.

Try saving the file as a new document, or copy and pasting the code into a new document and saving it as a new file. I would bet that fixes your issue.

Apache — index.php not loading by default, Thats why the browser downloads the index.php file rather than showing the web page. Do the following. If sudo a2enmod php5 returns module does not exist then the problem is with libapache2-mod-php5. Purge remove the module with command sudo apt-get —purge remove libapache2-mod-php5 Then install it …

Php web page not loading

Enable errors to see errors, this way:

ini_set('error_reporting', E_ALL); ini_set('display_errors', true); 

Источник