Справочник Пользователя для Kenwood TK-280
1. Order the ESN key/firmware Labor Code options: L-892, L-893 or L-894; specify model radio(s).
Pre-loaded ESN hardware key(s) with the ordered quantities of ESN’s and a PassPort® radio firmware diskette will be shipped (100 ESN’s
maximum per hardware key). Important: Any depleted key previously registered to a technicians computer must be retained to
register any new purchased key to the computer; please retain the old key until the new one is received.
2. Other required items:
a. KPG-64D: PassPort® ESN Install Program: the KPG-64D only needs to be ordered one time. It is re-usable for subsequent ESN orders
(unless an upgrade is recommended).
b. KPG-63D Radio Programming Software: required to program all PassPort® parameters for all PassPort® enabled radios, the KPG-63D will
not program LTR or conventional parameters.
c. KPG-49D Radio Programming Software: required only if LTR or conventional systems are also tbe programmed in the PassPort® radio.
3. The KPG-49D radio programming software is required for LTR & conventional site programming
For VHF/UHF models TK-280/780/380/880 new radio orders, the Kenwood-installed PassPort® ESN / firmware option is no charge:
Order the PassPort® ESN/Firmware option L-938 for each PassPort® radio.
Other required items:
a. KPG-63D Radio Programming Software: the KPG-63D is required to program all PassPort® parameters for all PassPort® enabled
radios, the KPG-63D will not program LTR or conventional parameters.
b. KPG-49D is required only if LTR or conventional systems are to also be programmed in the PassPort® radio.
Скачать и распечатать инструкцию
- Прочитать и распечатать без рекламы
- Загрузить, чтобы сохранить себе
- Править, переслать или читать оффлайн
Kenwood TK-280 User Manual
GENERAL FEATURES
5W VHF / 4W UHF Transmit Power
Wide Band Frequency Ranges
12.5 / 25 kHz Channel Spacing
Programmable Power Per Channel
Companded Audio Per Channel (wide &
narrow*)
500 mW Audio Power
Lighted Front Panel Dot Matrix LCD
10 Character Alphanumeric Display
3 Numeric Character Sub-Display
Dot Matrix Lighted LCD
LCD Operational Icons
Two Color Tri-State LED
5 Programmable Function Keys (lighted)
DTMF Keypad Models
Shift Key Function (keypad models)
Optional Speaker Mic (w/ 2 PF Keys)
Recessed Orange Emergency/AUX Key
Encryption/Scrambler Board Control
ANI Board Control
PTT ID Side-Tone (ANI Boards)*
PTT ID TA Inhibit*
Emergency Type (FS, DTMF, ANI Brd.)*
Emergency Calling Feature
Key Lock Feature
DTMF Decode Selective Call
DTMF Deadbeat Disable
DTMF PTT ID & DTMF Emergency ID*
Alert with Transpond (2-Tone, DTMF)*
Call Alert Tone: Mom or Continuous
(2-Tone, DTMF & FleetSync®)*
Auto-Dial Memory (32 numbers)
Key Lock Feature
Low Battery Alert
Weather-Sealed Accessory Connector
PTT Release Tone
FLEETSYNC® CONT.
ST# 90- Stun radio (No TX)
ST# 91- Stun radio (No TX / No RX audio)
ST# 92- Turn off Stun
ST# 93- ACK stun is ON
ST# 94- ACK stun is OFF
ST# 80-87, 95-97 (Reserved for future use)
Selective Call
Short Text Messages** (stored/display)
———————————————
* Features added in Ver. 2 radios
** Fleetsync® Enhanced Option required (included
as of 10/1/02)
—————————————————
INCLUDED ITEMS
Spring Action Belt Clip, Instruction Manual
Руководство по эксплуатации Kenwood TK-280
Наша цель — обеспечить Вам самый быстрый доступ к руководству по эксплуатации устройства Kenwood TK-280 . Пользуясь просмотром онлайн Вы можете быстро просмотреть содержание и перейти на страницу, на которой найдете решение своей проблемы с Kenwood TK-280 .
Для Вашего удобства
Если просмотр руководства Kenwood TK-280 непосредственно на этой странице для Вас неудобен, Вы можете воспользоваться двумя возможными решениями:
- Полноэкранный просмотр -, Чтобы удобно просматривать инструкцию (без скачивания на компьютер) Вы можете использовать режим полноэкранного просмотра. Чтобы запустить просмотр инструкции Kenwood TK-280 на полном экране, используйте кнопку Полный экран .
- Скачивание на компьютер — Вы можете также скачать инструкцию Kenwood TK-280 на свой компьютер и сохранить ее в своем архиве. Если ты все же не хотите занимать место на своем устройстве, Вы всегда можете скачать ее из ManualsBase.
Печатная версия
Многие предпочитают читать документы не на экране, а в печатной версии. Опция распечатки инструкции также предусмотрена и Вы можете воспользоваться ею нажав на ссылку, находящуюся выше — Печатать инструкцию . Вам не обязательно печатать всю инструкцию Kenwood TK-280 а только некоторые страницы. Берегите бумагу.
Резюме
Ниже Вы найдете заявки которые находятся на очередных страницах инструкции для Kenwood TK-280 . Если Вы хотите быстро просмотреть содержимое страниц, которые находятся на очередных страницах инструкции, Вы воспользоваться ими.
Краткое содержание этого руководства в настоящее время недоступно.
| # | Руководство по эксплуатации | Категория | Скачать |
|---|---|---|---|
| 1 | Kenwood FleetSync TK-5710(H) Руководство по эксплуатации | Коротковолновый передатчик | 5 |
| 2 | Kenwood FleetSync TK-8102H Руководство по эксплуатации | Коротковолновый передатчик | 95 |
| 3 | Kenwood FleetSync TK-790 Руководство по эксплуатации | Коротковолновый передатчик | 11 |
| 4 | Kenwood FleetSync TK-7150 Руководство по эксплуатации | Коротковолновый передатчик | 1 |
| 5 | Kenwood FleetSync TK-690 Руководство по эксплуатации | Коротковолновый передатчик | 4 |
| 6 | Kenwood FleetSync TK-5810(H) Руководство по эксплуатации | Коротковолновый передатчик | 2 |
| 7 | Kenwood FleetSync TK-980 Руководство по эксплуатации | Коротковолновый передатчик | 65 |
| 8 | Kenwood FleetSync TK-8150 Руководство по эксплуатации | Коротковолновый передатчик | 1 |
| 9 | Kenwood FleetSync TK-981 Руководство по эксплуатации | Коротковолновый передатчик | 0 |
| 10 | Kenwood FreeTalk FM UBZ-GR14 Руководство по эксплуатации | Коротковолновый передатчик | 52 |
Контактная информация
Интернет-база инструкций по эксплуатации
© 2023 by ManualsBase.com. All Rights Reserved.
Kenwood TK-280 User Manual
GENERAL FEATURES
5W VHF / 4W UHF Transmit Power
Wide Band Frequency Ranges
12.5 / 25 kHz Channel Spacing
Programmable Power Per Channel
Companded Audio Per Channel (wide &
narrow*)
500 mW Audio Power
Lighted Front Panel Dot Matrix LCD
10 Character Alphanumeric Display
3 Numeric Character Sub-Display
Dot Matrix Lighted LCD
LCD Operational Icons
Two Color Tri-State LED
5 Programmable Function Keys (lighted)
DTMF Keypad Models
Shift Key Function (keypad models)
Optional Speaker Mic (w/ 2 PF Keys)
Recessed Orange Emergency/AUX Key
Encryption/Scrambler Board Control
ANI Board Control
PTT ID Side-Tone (ANI Boards)*
PTT ID TA Inhibit*
Emergency Type (FS, DTMF, ANI Brd.)*
Emergency Calling Feature
Key Lock Feature
DTMF Decode Selective Call
DTMF Deadbeat Disable
DTMF PTT ID & DTMF Emergency ID*
Alert with Transpond (2-Tone, DTMF)*
Call Alert Tone: Mom or Continuous
(2-Tone, DTMF & FleetSync®)*
Auto-Dial Memory (32 numbers)
Key Lock Feature
Low Battery Alert
Weather-Sealed Accessory Connector
PTT Release Tone
FLEETSYNC® CONT.
ST# 90- Stun radio (No TX)
ST# 91- Stun radio (No TX / No RX audio)
ST# 92- Turn off Stun
ST# 93- ACK stun is ON
ST# 94- ACK stun is OFF
ST# 80-87, 95-97 (Reserved for future use)
Selective Call
Short Text Messages** (stored/display)
———————————————
* Features added in Ver. 2 radios
** Fleetsync® Enhanced Option required (included
as of 10/1/02)
—————————————————
INCLUDED ITEMS
Spring Action Belt Clip, Instruction Manual
Amateur Radio Software
Motorola Tetra Radio, MotoTRBO Radio, Commercial Series Radio, Astro 25 Radio, Professional Radio, Trunking Radio, MPT Radio, Alpha Radio, Select-5 Radio, Kenwood Radio, Yaesu Radio, Icom Radio, Vertex Radio, Alinco Radio, etc.
Sunday, July 19, 2009
Kenwood KPG-60D (TK-280 TK-380 TK-780 TK-880)
You can program the TK-280/380/780/880 transceiver with the KPG-60D programming software.
We recommend you input all the necessary programming data and save the data to the PC using this software. After this is completed, program the transceiver using the stored data. Print out the programming data if desired.
You can also retrieve the transceiver data in order to modify it on the PC.
***[SUPPLIED ITEMS]***
The KPG-60D programming software package includes:
* 2 floppy disks (3.5″, 1.44MB)
* Installation manual
***[APPLICABLE TRANSCEIVERS]***
This programming software supports the TK-280/380/780/880 transceiver.
***[HARDWARE/ SOFTWARE REQUIREMENTS]***
The software is designed to run on an IBM PC, PS/2, and compatible PCs.
The PC must use the MS-Windows 95/98 operating systems.
The PC must have a serial communication port. The communication port must be compatible with IBM PC asynchronous communications adapter specifications.
You may use the COM1, COM2, COM3 or COM4 port on the PC.
Use the optional KPG-36/46 interface cable to connect the transceiver to the PC.
1. Make sure the PC power is off.
2. Connect the 25-pin connector (DB25) of the KPG-36/46 cable to the PC COM1, COM2, COM3 or COM4 port. If the COM port has only 9 pins (DB9), use a plug adapter to convert the DB25 to a DB9.
3. Turn the PC on.
4. Make sure the transceiver power is off.
5. Connect the universal connector of the KPG-36/46 cable to the transceiver microphone connector.
6. Turn the transceiver on.
After connecting the transceiver to the PC (with the KPG-36/46 cable), you are ready to install the KPG-60D programming software.
***[INSTALLING the KPG-60D PROGRAMMING SOFTWARE TO YOUR HARD DISK]***
1. Insert the KPG-60D Setup DISK into drive A.
2. Open Explorer (File managing application), and select A:.
3. Select Setup.exe.
The installation program copies the necessary files from drive A to the hard disk.
***[PROGRAMMING PROCEDURE]***
This section explains three typical programming operations.
Note : When the programming data is transferred from the PC to the transceiver (writing the programming data) or vice versa (reading the programming data), the transceiver will automatically enter PC mode. -PROGRAM- appears on the display.
**[CREATING AND WRITING NEW DATA TO A TRANSCEIVER]**
1. Specify the transceiver model you want to program. (Model)
2. Input all necessary data. (Edit)
3. Write the data to the transceiver. (Program/Write to transceiver)
4. Copy the data to a disk if necessary. (File/Save As)
**[MODIFYING DATA PREVIOUSLY WRITTEN TO A TRANSCEIVER]**
1. Read the transceiver data. (Program/Read from transceiver)
2. Modify the data. (Edit)
3. Write the modified data to the transceiver. (Program/Write to transceiver)
4. Copy the data to a disk if necessary. (File/Save As)
**[MODIFYING DISK DATA, THEN WRITING TO A TRANSCEIVER]**
1. Read the disk data. (File/Open)
2. Modify the data. (Edit)
3. Write the data to the transceiver. (Program/Write to transceiver)
4. Copy the data to a disk if necessary. (File/Save As)
***[STARTING THE PROGRAM]***
After installing the software, you can immediately program and TK-280/380/780/880 transceiver.
Select the KPG60D icon in the start menu. The program starts and the top menu screen appears.
***[EXITING THE PROGRAM]***
When you finish programming the transceiver, select Exit from the File menu.
***[INITIAL SCREEN]***
First, set up the model of the transceiver.
The top menu screen consists of a menu bar (top) and a Channel Information window.
The menu bar shows the available pull-down title menus. Use the menus to open windows so that you can edit and/or process data, and execute commands.
The Channel Information window shows various channel setting.