Class MouseEvent
An event which indicates that a mouse action occurred in a component. A mouse action is considered to occur in a particular component if and only if the mouse cursor is over the unobscured part of the component’s bounds when the action happens. For lightweight components, such as Swing’s components, mouse events are only dispatched to the component if the mouse event type has been enabled on the component. A mouse event type is enabled by adding the appropriate mouse-based EventListener to the component ( MouseListener or MouseMotionListener ), or by invoking Component.enableEvents(long) with the appropriate mask parameter ( AWTEvent.MOUSE_EVENT_MASK or AWTEvent.MOUSE_MOTION_EVENT_MASK ). If the mouse event type has not been enabled on the component, the corresponding mouse events are dispatched to the first ancestor that has enabled the mouse event type.
For example, if a MouseListener has been added to a component, or enableEvents(AWTEvent.MOUSE_EVENT_MASK) has been invoked, then all the events defined by MouseListener are dispatched to the component. On the other hand, if a MouseMotionListener has not been added and enableEvents has not been invoked with AWTEvent.MOUSE_MOTION_EVENT_MASK , then mouse motion events are not dispatched to the component. Instead the mouse motion events are dispatched to the first ancestors that has enabled mouse motion events.
- Mouse Events
- a mouse button is pressed
- a mouse button is released
- a mouse button is clicked (pressed and released)
- the mouse cursor enters the unobscured part of component’s geometry
- the mouse cursor exits the unobscured part of component’s geometry
- the mouse is moved
- the mouse is dragged
A MouseEvent object is passed to every MouseListener or MouseAdapter object which is registered to receive the «interesting» mouse events using the component’s addMouseListener method. ( MouseAdapter objects implement the MouseListener interface.) Each such listener object gets a MouseEvent containing the mouse event.
A MouseEvent object is also passed to every MouseMotionListener or MouseMotionAdapter object which is registered to receive mouse motion events using the component’s addMouseMotionListener method. ( MouseMotionAdapter objects implement the MouseMotionListener interface.) Each such listener object gets a MouseEvent containing the mouse motion event.
When a mouse button is clicked, events are generated and sent to the registered MouseListener s. The state of modal keys can be retrieved using InputEvent.getModifiers() and InputEvent.getModifiersEx() . The button mask returned by InputEvent.getModifiers() reflects only the button that changed state, not the current state of all buttons. (Note: Due to overlap in the values of ALT_MASK/BUTTON2_MASK and META_MASK/BUTTON3_MASK, this is not always true for mouse events involving modifier keys). To get the state of all buttons and modifier keys, use InputEvent.getModifiersEx() . The button which has changed state is returned by getButton()
For example, if the first mouse button is pressed, events are sent in the following order:
id modifiers button
MOUSE_PRESSED: BUTTON1_MASK BUTTON1 MOUSE_RELEASED: BUTTON1_MASK BUTTON1 MOUSE_CLICKED: BUTTON1_MASK BUTTON1For example, if the user presses button 1 followed by button 2, and then releases them in the same order, the following sequence of events is generated:
id modifiers button
MOUSE_PRESSED: BUTTON1_MASK BUTTON1 MOUSE_PRESSED: BUTTON2_MASK BUTTON2 MOUSE_RELEASED: BUTTON1_MASK BUTTON1 MOUSE_CLICKED: BUTTON1_MASK BUTTON1 MOUSE_RELEASED: BUTTON2_MASK BUTTON2 MOUSE_CLICKED: BUTTON2_MASK BUTTON2If button 2 is released first, the MOUSE_RELEASED / MOUSE_CLICKED pair for BUTTON2_MASK arrives first, followed by the pair for BUTTON1_MASK .
Some extra mouse buttons are added to extend the standard set of buttons represented by the following constants: BUTTON1 , BUTTON2 , and BUTTON3 . Extra buttons have no assigned BUTTONx constants as well as their button masks have no assigned BUTTONx_DOWN_MASK constants. Nevertheless, ordinal numbers starting from 4 may be used as button numbers (button ids). Values obtained by the getMaskForButton(button) method may be used as button masks.
- In a multi-screen environment without a virtual device:
The reported coordinates for mouse drag events are clipped to fit within the bounds of the GraphicsConfiguration associated with the Component . - In a multi-screen environment with a virtual device:
The reported coordinates for mouse drag events are clipped to fit within the bounds of the virtual device associated with the Component .
An unspecified behavior will be caused if the id parameter of any particular MouseEvent instance is not in the range from MOUSE_FIRST to MOUSE_LAST -1 ( MOUSE_WHEEL is not acceptable).
Java getting mouse position
A MouseEvent object is passed to every MouseListener or MouseAdapter object which is registered to receive the «interesting» mouse events using the component’s addMouseListener method. ( MouseAdapter objects implement the MouseListener interface.) Each such listener object gets a MouseEvent containing the mouse event.
A MouseEvent object is also passed to every MouseMotionListener or MouseMotionAdapter object which is registered to receive mouse motion events using the component’s addMouseMotionListener method. ( MouseMotionAdapter objects implement the MouseMotionListener interface.) Each such listener object gets a MouseEvent containing the mouse motion event.
When a mouse button is clicked, events are generated and sent to the registered MouseListener s. The state of modal keys can be retrieved using InputEvent.getModifiers() and InputEvent.getModifiersEx() . The button mask returned by InputEvent.getModifiers() reflects only the button that changed state, not the current state of all buttons. (Note: Due to overlap in the values of ALT_MASK/BUTTON2_MASK and META_MASK/BUTTON3_MASK, this is not always true for mouse events involving modifier keys). To get the state of all buttons and modifier keys, use InputEvent.getModifiersEx() . The button which has changed state is returned by getButton()
For example, if the first mouse button is pressed, events are sent in the following order:
id modifiers button
MOUSE_PRESSED: BUTTON1_MASK BUTTON1 MOUSE_RELEASED: BUTTON1_MASK BUTTON1 MOUSE_CLICKED: BUTTON1_MASK BUTTON1For example, if the user presses button 1 followed by button 2, and then releases them in the same order, the following sequence of events is generated:
id modifiers button
MOUSE_PRESSED: BUTTON1_MASK BUTTON1 MOUSE_PRESSED: BUTTON2_MASK BUTTON2 MOUSE_RELEASED: BUTTON1_MASK BUTTON1 MOUSE_CLICKED: BUTTON1_MASK BUTTON1 MOUSE_RELEASED: BUTTON2_MASK BUTTON2 MOUSE_CLICKED: BUTTON2_MASK BUTTON2If button 2 is released first, the MOUSE_RELEASED / MOUSE_CLICKED pair for BUTTON2_MASK arrives first, followed by the pair for BUTTON1_MASK .
Some extra mouse buttons are added to extend the standard set of buttons represented by the following constants: BUTTON1 , BUTTON2 , and BUTTON3 . Extra buttons have no assigned BUTTONx constants as well as their button masks have no assigned BUTTONx_DOWN_MASK constants. Nevertheless, ordinal numbers starting from 4 may be used as button numbers (button ids). Values obtained by the getMaskForButton(button) method may be used as button masks.
- In a multi-screen environment without a virtual device:
The reported coordinates for mouse drag events are clipped to fit within the bounds of the GraphicsConfiguration associated with the Component . - In a multi-screen environment with a virtual device:
The reported coordinates for mouse drag events are clipped to fit within the bounds of the virtual device associated with the Component .
An unspecified behavior will be caused if the id parameter of any particular MouseEvent instance is not in the range from MOUSE_FIRST to MOUSE_LAST -1 ( MOUSE_WHEEL is not acceptable).
Class MouseEvent
An event which indicates that a mouse action occurred in a component. A mouse action is considered to occur in a particular component if and only if the mouse cursor is over the unobscured part of the component’s bounds when the action happens. For lightweight components, such as Swing’s components, mouse events are only dispatched to the component if the mouse event type has been enabled on the component. A mouse event type is enabled by adding the appropriate mouse-based EventListener to the component ( MouseListener or MouseMotionListener ), or by invoking Component.enableEvents(long) with the appropriate mask parameter ( AWTEvent.MOUSE_EVENT_MASK or AWTEvent.MOUSE_MOTION_EVENT_MASK ). If the mouse event type has not been enabled on the component, the corresponding mouse events are dispatched to the first ancestor that has enabled the mouse event type.
For example, if a MouseListener has been added to a component, or enableEvents(AWTEvent.MOUSE_EVENT_MASK) has been invoked, then all the events defined by MouseListener are dispatched to the component. On the other hand, if a MouseMotionListener has not been added and enableEvents has not been invoked with AWTEvent.MOUSE_MOTION_EVENT_MASK , then mouse motion events are not dispatched to the component. Instead the mouse motion events are dispatched to the first ancestors that has enabled mouse motion events.
- Mouse Events
- a mouse button is pressed
- a mouse button is released
- a mouse button is clicked (pressed and released)
- the mouse cursor enters the unobscured part of component’s geometry
- the mouse cursor exits the unobscured part of component’s geometry
- the mouse is moved
- the mouse is dragged
A MouseEvent object is passed to every MouseListener or MouseAdapter object which is registered to receive the «interesting» mouse events using the component’s addMouseListener method. ( MouseAdapter objects implement the MouseListener interface.) Each such listener object gets a MouseEvent containing the mouse event.
A MouseEvent object is also passed to every MouseMotionListener or MouseMotionAdapter object which is registered to receive mouse motion events using the component’s addMouseMotionListener method. ( MouseMotionAdapter objects implement the MouseMotionListener interface.) Each such listener object gets a MouseEvent containing the mouse motion event.
When a mouse button is clicked, events are generated and sent to the registered MouseListener s. The state of modal keys can be retrieved using InputEvent.getModifiers() and InputEvent.getModifiersEx() . The button mask returned by InputEvent.getModifiers() reflects only the button that changed state, not the current state of all buttons. (Note: Due to overlap in the values of ALT_MASK/BUTTON2_MASK and META_MASK/BUTTON3_MASK, this is not always true for mouse events involving modifier keys). To get the state of all buttons and modifier keys, use InputEvent.getModifiersEx() . The button which has changed state is returned by getButton()
For example, if the first mouse button is pressed, events are sent in the following order:
id modifiers button
MOUSE_PRESSED: BUTTON1_MASK BUTTON1 MOUSE_RELEASED: BUTTON1_MASK BUTTON1 MOUSE_CLICKED: BUTTON1_MASK BUTTON1For example, if the user presses button 1 followed by button 2, and then releases them in the same order, the following sequence of events is generated:
id modifiers button
MOUSE_PRESSED: BUTTON1_MASK BUTTON1 MOUSE_PRESSED: BUTTON2_MASK BUTTON2 MOUSE_RELEASED: BUTTON1_MASK BUTTON1 MOUSE_CLICKED: BUTTON1_MASK BUTTON1 MOUSE_RELEASED: BUTTON2_MASK BUTTON2 MOUSE_CLICKED: BUTTON2_MASK BUTTON2If button 2 is released first, the MOUSE_RELEASED / MOUSE_CLICKED pair for BUTTON2_MASK arrives first, followed by the pair for BUTTON1_MASK .
Some extra mouse buttons are added to extend the standard set of buttons represented by the following constants: BUTTON1 , BUTTON2 , and BUTTON3 . Extra buttons have no assigned BUTTONx constants as well as their button masks have no assigned BUTTONx_DOWN_MASK constants. Nevertheless, ordinal numbers starting from 4 may be used as button numbers (button ids). Values obtained by the getMaskForButton(button) method may be used as button masks.
- In a multi-screen environment without a virtual device:
The reported coordinates for mouse drag events are clipped to fit within the bounds of the GraphicsConfiguration associated with the Component . - In a multi-screen environment with a virtual device:
The reported coordinates for mouse drag events are clipped to fit within the bounds of the virtual device associated with the Component .
An unspecified behavior will be caused if the id parameter of any particular MouseEvent instance is not in the range from MOUSE_FIRST to MOUSE_LAST -1 ( MOUSE_WHEEL is not acceptable).