Html css пустая строка

How to line-break from css, without using
?

Note that this won’t work with react because the text is eventually bundled and will be put on the same line, which won’t trigger white-space CSS rule.

Impossible with the same HTML structure, you must have something to distinguish between Hello and How are you .

I suggest using span s that you will then display as blocks (just like a actually).

note also how much additional mark-up there is — the
element exists for a very good reason. If you want the line break because they are separate paragraphs, then simply mark them up as separate paragraphs.

You might need structured lines without actually using paragraphs. To markup a poem, a song or an address for example

@VincentRobert Right, but a poem is the canonical example for when
is the correct markup. Spans for a poem would be “wrong.”

Note that assigning display: block to an element will force a line break before and after, and so is not at all the same as having one line break.

Definitely use the

elements. A element should NOT be made into display:block, the whole point of is that it’s inline. I would do it this way:

. No wonked out CSS required.

Use
as normal, but hide it with display: none when you don’t want it.

I would expect most people finding this question want to use css / responsive design to decide whether or not a line-break appears in a specific place. (and don’t have anything personal against
)

While not immediately obvious, you can actually apply display:none to a
tag to hide it, which enables the use of media queries in tandem with semantic BR tags.

 
The quick brown fox 
jumps over the lazy dog
 

@media screen and (min-width: 20em) < br < display: none; /* hide the BR tag for wider screens (i.e. disable the line break) */ >> 

This is useful in responsive design where you need to force text into two lines at an exact break.

Simon, you are spot on — the example you name is the exact reason I was researching this question and the display: none solution is by far the most appropriate and useful.

Note that for cases where it would cause words to run together, you could use something like display: inline-block; width: 1em; instead of none .

Another «why didn’t I think of this?!» answer.
is great at what it does; no need to reinvent the wheel. Thanks!

@amh15 he doesn’t say WHY he wants to do that. Or rather what is wrong with BR. Is it preformatted text from a weather report web service, or is it a responsive design question. At time of answering all the pre/word wrap answers were already there. You’re right that the details matter but my answer has helped a lot of people that found this question based on keywords so I don’t see why you have to be so nit picky. I’d love to know what he really wanted to do. But I also don’t care.

There are several options for defining the handling of white spaces and line breaks. If one can put the content in e.g. a

tag it is pretty easy to get whatever one wants.

For preserving line breaks but not white spaces use pre-line (not pre ) like in:

If another behavior is wanted choose among one of these (WS=WhiteSpace, LB=LineBreak):

white-space: normal; /* collapse WS, wrap as necessary, collapse LB */ white-space: nowrap; /* collapse WS, no wrapping, collapse LB */ white-space: pre; /* preserve WS, no wrapping, preserve LB */ white-space: pre-wrap; /* preserve WS, wrap as necessary, preserve LB */ white-space: inherit; /* all as parent element */ 

The «\a» command in CSS generates a carriage return. This is CSS, not HTML, so it shall be closer to what you want: no extra markup.

In a blockquote , the example below displays both the title and the source link and separate the two with a carriage return ( «\a» ):

+1 because its CSS only, and doesn’t recommend use of pre, br tags nor changing the display mode to block (which adds different behavior, might break if the parent is in display:flex and therefore is a hack in this context). Its not fancy, really, just a modern technique. If you want the exact same markup, but to actually react differently that’s the way to go.

Brilliant idea. Note the » – do not use simple quotes ‘ because you want to allow the \a to get parsed as a special character.

I would have up-voted this if there was some HTML and maybe a Fiddle to help visualize what you’re doing.

With this CSS every enter inside the P tag will be a break-line at the HTML.

This is exactly what I was looking for! Works perfectly for element content generated from JS (e.g. JSON result from AJAX query, angular-schema-form, etc.) that gets passed through escaping/sanitization (e.g. normal AngularJS escaping behavior when not using ngBindHtml)

Building on what has been said before, this is a pure CSS solution that works.

 span < display: inline; >span:before 
First line of text. Next line. 
 

I just found a variation on this approach to be helpful for multi-line input type=’text’, wrapping the input, and then laying the text over it with a wrapper div . That also requires pointer-events:none;` on the :before in order to still be able to click the button below.

To make an element have a line break afterwards, assign it:

Non-floated elements after a block level element will appear on the next line. Many elements, such as

and are already block level elements so you can just use those.

But while this is good to know, this really depends more on the context of your content. In your example, you would not want to use CSS to force a line break. The
is appropriate because semantically the p tag is the the most appropriate for the text you are displaying. More markup just to hang CSS off it is unnecessary. Technically it’s not exactly a paragraph, but there is no tag, so use what you have. Describing your content well with HTMl is way more important — after you have that then figure out how to make it look pretty.

Источник

: The Line Break element

The HTML element produces a line break in text (carriage-return). It is useful for writing a poem or an address, where the division of lines is significant.

Try it

As you can see from the above example, a
element is included at each point where we want the text to break. The text after the
begins again at the start of the next line of the text block.

Note: Do not use
to create margins between paragraphs; wrap them in elements and use the CSS margin property to control their size.

Attributes

This element’s attributes include the global attributes.

Deprecated attributes

Indicates where to begin the next line after the break.

Styling with CSS

The
element has a single, well-defined purpose — to create a line break in a block of text. As such, it has no dimensions or visual output of its own, and there is very little you can do to style it.

You can set a margin on
elements themselves to increase the spacing between the lines of text in the block, but this is a bad practice — you should use the line-height property that was designed for that purpose.

Examples

Simple br

In the following example we use
elements to create line breaks between the different lines of a postal address:

br /> 331 E. Evelyn Avenuebr /> Mountain View, CAbr /> 94041br /> USAbr /> 

Result

Accessibility concerns

Creating separate paragraphs of text using
is not only bad practice, it is problematic for people who navigate with the aid of screen reading technology. Screen readers may announce the presence of the element, but not any content contained within
s. This can be a confusing and frustrating experience for the person using the screen reader.

Use

elements, and use CSS properties like margin to control their spacing.

Technical summary

Content categories	Flow content, phrasing content.
Permitted content	None; it is a void element.
Tag omission	Must have a start tag, and must not have an end tag. In XHTML documents, write this element as .
Permitted parents	Any element that accepts phrasing content.
Implicit ARIA role	No corresponding role
Permitted ARIA roles	none , presentation
DOM interface	HTMLBRElement

Specifications

Browser compatibility

BCD tables only load in the browser

See also

Found a content problem with this page?

This page was last modified on Apr 13, 2023 by MDN contributors.

Your blueprint for a better internet.

MDN

Support

Our communities

Developers

Visit Mozilla Corporation’s not-for-profit parent, the Mozilla Foundation.
Portions of this content are ©1998– 2023 by individual mozilla.org contributors. Content available under a Creative Commons license.

Источник

HTML
Tag

To force
line breaks
in a text,
use the br
element.

More «Try it Yourself» examples below.

Definition and Usage

The
tag inserts a single line break.

The
tag is useful for writing addresses or poems.

The
tag is an empty tag which means that it has no end tag.

Tips and Notes

Note: Use the
tag to enter line breaks, not to add space between paragraphs.

Browser Support

Global Attributes

Event Attributes

More Examples

Example

Be not afraid of greatness.

Some are born great,

some achieve greatness,

and others have greatness thrust upon them.

Related Pages

Default CSS Settings

COLOR PICKER

Report Error

If you want to report an error, or if you want to make a suggestion, do not hesitate to send us an e-mail:

Thank You For Helping Us!

Your message has been sent to W3Schools.

Top Tutorials

Top References

Top Examples

Get Certified

W3Schools is optimized for learning and training. Examples might be simplified to improve reading and learning. Tutorials, references, and examples are constantly reviewed to avoid errors, but we cannot warrant full correctness of all content. While using W3Schools, you agree to have read and accepted our terms of use, cookie and privacy policy.

Источник

Основные HTML теги форматирования текста

Если Вы хотите, чтобы люди читали то, что Вы написали, то надо уделить время для форматирования текста. Люди не любят читать широкие и длинные абзацы текста на страницах сайтов, если они не разбиты на более мелкие. В этой статье вы узнаете основные HTML-теги форматирования текста.

Пробелы и пустые строки

Прежде чем Вы начнете форматировать текст, нужно сначала понять, как браузеры читают пробелы и пустые строки.

Если Вы считаете, что если сделаете несколько последовательных пробелов между двух слов и эти пробелы появятся этими словами на экране браузера, то это не так. По умолчанию будет отображаться только один пробел. Поэтому необходимо использовать специальные HTML-теги для создания нескольких пробелов.

Аналогичным образом, если Вы начинаете новую строку в исходном документе или у вас есть последовательность пустых строк, они будут просто проигнорированы браузером и будут рассматриваются как один большой пробел пробел. Для этого тоже существуют специальные HTML-теги для создания нескольких пустых строк.

Создание заголовков (h1 — h6)

Любая страница начинается с заголовка. С помощью тегов форматирования мы можем использовать разные размеры заголовков. HTML имеет шесть уровней заголовков, которые представлены тегами: , , , , , и . При отображении любого заголовка, браузер добавляет одну пустую строку до и после заголовка.

Источник