font-size

The font-size CSS property sets the size of the font. Changing the font size also updates the sizes of the font size-relative units, such as em , ex , and so forth.

Try it

Syntax

/* values */ font-size: xx-small; font-size: x-small; font-size: small; font-size: medium; font-size: large; font-size: x-large; font-size: xx-large; font-size: xxx-large; /* values */ font-size: smaller; font-size: larger; /* values */ font-size: 12px; font-size: 0.8em; /* values */ font-size: 80%; /* math value */ font-size: math; /* Global values */ font-size: inherit; font-size: initial; font-size: revert; font-size: revert-layer; font-size: unset; 

The font-size property is specified in one of the following ways:

• As one of the absolute-size, relative-size or math keywords
• As a or a , relative to the element’s font size.

Values

Absolute-size keywords, based on the user’s default font size (which is medium ).

Relative-size keywords. The font will be larger or smaller relative to the parent element’s font size, roughly by the ratio used to separate the absolute-size keywords above.

For font-relative units that are root-based (such as rem ), the font size is relative to the size of the font used by the (root) element.

Note: To maximize accessibility, it is generally best to use values that are relative to the user’s default font size.

• math Experimental Special mathematical scaling rules must be applied when determining the computed value of the font-size property.

Description

There are several ways to specify the font size, including keywords or numerical values for pixels or ems. Choose the appropriate method based on the needs of the particular web page.

Keywords

Pixels

Setting the font size in pixel values ( px ) is a good choice when you need pixel accuracy. A px value is static. This is an OS-independent and cross-browser way of literally telling the browsers to render the letters at exactly the number of pixels in height that you specified. The results may vary slightly across browsers, as they may use different algorithms to achieve a similar effect.

Font sizing settings can also be used in combination. For example, if a parent element is set to 16px and its child element is set to larger , the child element displays larger than the parent element on the page.

Note: Defining font sizes in px is not accessible, because the user cannot change the font size in some browsers. For example, users with limited vision may wish to set the font size much larger than the size chosen by a web designer. Avoid using them for font sizes if you wish to create an inclusive design.

Ems

Using an em value creates a dynamic or computed font size (historically the em unit was derived from the width of a capital «M» in a given typeface.). The numeric value acts as a multiplier of the font-size property of the element on which it is used. Consider this example:

In this case, the font size of

elements will be double the computed font-size inherited by

elements. By extension, a font-size of 1em equals the computed font-size of the element on which it is used.

If a font-size has not been set on any of the

‘s ancestors, then 1em will equal the default browser font-size , which is usually 16px . So, by default 1em is equivalent to 16px , and 2em is equivalent to 32px . If you were to set a font-size of 20px on the element say, then 1em on the

elements would instead be equivalent to 20px , and 2em would be equivalent to 40px .

In order to calculate the em equivalent for any pixel value required, you can use this formula:

em = desired element pixel value / parent element font-size in pixels

For example, suppose the font-size of the of the page is set to 16px . If the font-size you want is 12px , then you should specify 0.75em (because 12/16 = 0.75). Similarly, if you want a font size of 10px , then specify 0.625em (10/16 = 0.625); for 22px , specify 1.375em (22/16).

The em is a very useful unit in CSS since it automatically adapts its length relative to the font that the reader chooses to use.

One important fact to keep in mind: em values compound. Take the following HTML and CSS:

html  font-size: 100%; > span  font-size: 1.6em; > 

div> span>Outer span>innerspan> outerspan> div> 

Assuming that the browser’s default font-size is 16px, the words «outer» would be rendered at 25.6px, but the word «inner» would be rendered at 40.96px. This is because the inner ‘s font-size is 1.6em which is relative to its parent’s font-size , which is in turn relative to its parent’s font-size . This is often called compounding.

Rems

rem values were invented in order to sidestep the compounding problem. rem values are relative to the root html element, not the parent element. In other words, it lets you specify a font size in a relative fashion without being affected by the size of the parent, thereby eliminating compounding.

The CSS below is nearly identical to the previous example. The only exception is that the unit has been changed to rem .

html  font-size: 100%; > span  font-size: 1.6rem; > 

Then we apply this CSS to the same HTML, which looks like this:

span>Outer span>innerspan> outerspan> 

In this example, the words «outer inner outer» are all displayed at 25.6px (assuming that the browser’s font-size has been left at the default value of 16px).

Ex

Like the em unit, an element’s font-size set using the ex unit is computed or dynamic. It behaves in exactly the same way, except that when setting the font-size property using ex units, the font-size equals the x-height of the first available font used on the page. The number value multiplies the element’s inherited font-size and the font-size compounds relatively.

See the W3C Editor’s Draft for a more detailed description of font-relative length units such as ex .

Formal definition

Initial value	medium
Applies to	all elements. It also applies to ::first-letter and ::first-line .
Inherited	yes
Percentages	refer to the parent element’s font size
Computed value	as specified, but with relative lengths converted into absolute lengths
Animation type	a length

Formal syntax

Источник

CSS Font Size

Being able to manage the text size is important in web design. However, you should not use font size adjustments to make paragraphs look like headings, or headings look like paragraphs.

Always use the proper HTML tags, like — for headings and

for paragraphs.

The font-size value can be an absolute, or relative size.

• Sets the text to a specified size
• Does not allow a user to change the text size in all browsers (bad for accessibility reasons)
• Absolute size is useful when the physical size of the output is known

• Sets the size relative to surrounding elements
• Allows a user to change the text size in browsers

Note: If you do not specify a font size, the default size for normal text, like paragraphs, is 16px (16px=1em).

Set Font Size With Pixels

Setting the text size with pixels gives you full control over the text size:

Example

Tip: If you use pixels, you can still use the zoom tool to resize the entire page.

Set Font Size With Em

To allow users to resize the text (in the browser menu), many developers use em instead of pixels.

1em is equal to the current font size. The default text size in browsers is 16px. So, the default size of 1em is 16px.

The size can be calculated from pixels to em using this formula: pixels/16=em

Example

h2 font-size: 1.875em; /* 30px/16=1.875em */
>

p font-size: 0.875em; /* 14px/16=0.875em */
>

In the example above, the text size in em is the same as the previous example in pixels. However, with the em size, it is possible to adjust the text size in all browsers.

Unfortunately, there is still a problem with older versions of Internet Explorer. The text becomes larger than it should when made larger, and smaller than it should when made smaller.

Use a Combination of Percent and Em

The solution that works in all browsers, is to set a default font-size in percent for the element:

Example

Our code now works great! It shows the same text size in all browsers, and allows all browsers to zoom or resize the text!

Responsive Font Size

The text size can be set with a vw unit, which means the «viewport width».

That way the text size will follow the size of the browser window:

Hello World

Resize the browser window to see how the font size scales.

Example

Hello World

Viewport is the browser window size. 1vw = 1% of viewport width. If the viewport is 50cm wide, 1vw is 0.5cm.

Источник

HTML Font Size – How to Change Text Size with an HTML Tag

Joel Olawanle

When you add text to your HTML file with an HTML tag, you won’t always want the text to remain the default size. You’ll want to be able to adjust how the text displays in the browser.

In this article, you will learn how to change the text size with an HTML tag.

Before you proceed, it is essential to know that there is only one way we can do this: through CSS’s font-size property. We can use the font-size property through inline, internal, or external styling.

In the past, we could adjust text size within our HTML tag without using CSS. But that was before HTML5. Then we added text using the tag, which can take in an attribute of size as seen below:

This size attribute can take in value from 1-7 in which the text size increases from 1 to 7. But like I said, this has long been depreciated, and most people don’t even know it existed.

In case you are in a rush to see how you can change the size of your text, then here it is:

// Using inline CSS 
Hello World!
 // Using internal/external CSS selector

Suppose you are not in a rush. Let’s briefly dive right in.

How to Change Text Size With Inline CSS

Inline CSS allows you to apply styles to specific HTML elements. This means we are putting CSS into an HTML tag directly. We use the style attribute, which now holds all our styling.

We use the font-size property alongside our value to change the text size using inline CSS. This value can use any of your preferred CSS units such as em, px, rem, and so on.

 
Hello World!
 
Any text whose font we want to change
 

A perfect syntax would be:

How to Change Text Size With Internal or External CSS

The approach you use to change text size in internal and external CSS styling is similar, since you use a selector. The general syntax for this is:

The selector can either be our HTML tag or maybe a class or an ID. For example:

// HTML 
Any text whose font we want to change
 // CSS p

// HTML 
Any text whose font we want to change
 // CSS .my-paragraph

Wrapping Up

In this article, you learned how to change the font/text size of an HTML element using CSS. You also saw how developers did it before the introduction of HTML5.

Also, keep in mind that it’s always better to style your HTML elements using internal or external styling, as it offers a lot of flexibility compared to inline styling.

For example, you can make use of one CSS class for all your p tags rather than having to add inline styles to all your p tag elements.

Using inline styles is not considered best practice because it results in a lot of repetition – you cannot reuse the styles elsewhere. To learn more, you can read my article on Inline Style in HTML.

I hope this tutorial gives you the knowledge to change the size of your HTML text so you can make it look better.

Источник