Css select class like

Type, class, and ID selectors

In this lesson, we examine some of the simplest selectors, which you will probably use most frequently in your work.

Prerequisites:	Basic computer literacy, basic software installed, basic knowledge of working with files, HTML basics (study Introduction to HTML), and an idea of how CSS works (study CSS first steps.)
Objective:	To learn about the different CSS selectors we can use to apply CSS to a document.

Type selectors

A type selector is sometimes referred to as a tag name selector or element selector because it selects an HTML tag/element in your document. In the example below, we have used the span , em and strong selectors.

Try adding a CSS rule to select the element and change its color to blue.

The universal selector

The universal selector is indicated by an asterisk ( * ). It selects everything in the document (or inside the parent element if it is being chained together with another element and a descendant combinator). In the following example, we use the universal selector to remove the margins on all elements. Instead of the default styling added by the browser — which spaces out headings and paragraphs with margins — everything is close together.

This kind of behavior can sometimes be seen in «reset stylesheets», which strip out all of the browser styling. Since the universal selector makes global changes, we use it for very specific situations, such as the one described below.

Using the universal selector to make your selectors easier to read

One use of the universal selector is to make selectors easier to read and more obvious in terms of what they are doing. For example, if we wanted to select any descendant elements of an element that are the first child of their parent, including direct children, and make them bold, we could use the :first-child pseudo-class. We will learn more about this in the lesson on pseudo-classes and pseudo-elements, as a descendant selector along with the element selector:

article :first-child  font-weight: bold; > 

However, this selector could be confused with article:first-child , which will select any element that is the first child of another element.

To avoid this confusion, we can add the universal selector to the :first-child pseudo-class, so it is more obvious what the selector is doing. It is selecting any element which is the first-child of an element, or the first-child of any descendant element of :

article *:first-child  font-weight: bold; > 

Although both do the same thing, the readability is significantly improved.

Class selectors

The class selector starts with a dot ( . ) character. It will select everything in the document with that class applied to it. In the live example below we have created a class called highlight , and have applied it to several places in my document. All of the elements that have the class applied are highlighted.

Targeting classes on particular elements

You can create a selector that will target specific elements with the class applied. In this next example, we will highlight a with a class of highlight differently to an heading with a class of highlight . We do this by using the type selector for the element we want to target, with the class appended using a dot, with no white space in between.

This approach reduces the scope of a rule. The rule will only apply to that particular element and class combination. You would need to add another selector if you decided the rule should apply to other elements too.

Target an element if it has more than one class applied

You can apply multiple classes to an element and target them individually, or only select the element when all of the classes in the selector are present. This can be helpful when building up components that can be combined in different ways on your site.

In the example below, we have a that contains a note. The grey border is applied when the box has a class of notebox . If it also has a class of warning or danger , we change the border-color .

We can tell the browser that we only want to match the element if it has two classes applied by chaining them together with no white space between them. You’ll see that the last doesn’t get any styling applied, as it only has the danger class; it needs notebox as well to get anything applied.

ID selectors

An ID selector begins with a # rather than a dot character, but is used in the same way as a class selector. However, an ID can be used only once per page, and elements can only have a single id value applied to them. It can select an element that has the id set on it, and you can precede the ID with a type selector to only target the element if both the element and ID match. You can see both of these uses in the following example:

Warning: Using the same ID multiple times in a document may appear to work for styling purposes, but don’t do this. It results in invalid code, and will cause strange behavior in many places.

Note: As we learned in the lesson on specificity, an ID has high specificity. It will overrule most other selectors. In most cases, it is preferable to add a class to an element instead of an ID. However, if using the ID is the only way to target the element — perhaps because you do not have access to the markup and cannot edit it — this will work.

Summary

That wraps up Type, class, and ID selectors. We’ll continue exploring selectors by looking at attribute selectors.

Found a content problem with this page?

This page was last modified on Jun 30, 2023 by MDN contributors.

Your blueprint for a better internet.

Источник

Class selectors

The CSS class selector matches elements based on the contents of their class attribute.

Syntax

.class_name  style properties > 

Note that this is equivalent to the following attribute selector :

[class~=class_name]  style properties > 

Examples

CSS

.red  color: #f33; > .yellow-bg  background: #ffa; > .fancy  font-weight: bold; text-shadow: 4px 4px 3px #77f; > 

HTML

p class="red">This paragraph has red text.p> p class="red yellow-bg"> This paragraph has red text and a yellow background. p> p class="red fancy">This paragraph has red text and "fancy" styling.p> p>This is just a regular paragraph.p> 

Result

Specifications

Browser compatibility

BCD tables only load in the browser

See also

Found a content problem with this page?

This page was last modified on Jul 18, 2023 by MDN contributors.

Your blueprint for a better internet.

MDN

Support

Our communities

Developers

Visit Mozilla Corporation’s not-for-profit parent, the Mozilla Foundation.
Portions of this content are ©1998– 2023 by individual mozilla.org contributors. Content available under a Creative Commons license.

Источник

CSS Selectors

A CSS selector selects the HTML element(s) you want to style.

CSS Selectors

CSS selectors are used to «find» (or select) the HTML elements you want to style.

We can divide CSS selectors into five categories:

• Simple selectors (select elements based on name, id, class)
• Combinator selectors (select elements based on a specific relationship between them)
• Pseudo-class selectors (select elements based on a certain state)
• Pseudo-elements selectors (select and style a part of an element)
• Attribute selectors (select elements based on an attribute or attribute value)

This page will explain the most basic CSS selectors.

The CSS element Selector

The element selector selects HTML elements based on the element name.

Example

Here, all

elements on the page will be center-aligned, with a red text color:

The CSS id Selector

The id selector uses the id attribute of an HTML element to select a specific element.

The id of an element is unique within a page, so the id selector is used to select one unique element!

To select an element with a specific id, write a hash (#) character, followed by the id of the element.

Example

The CSS rule below will be applied to the HTML element with

Note: An id name cannot start with a number!

The CSS class Selector

The class selector selects HTML elements with a specific class attribute.

To select elements with a specific class, write a period (.) character, followed by the class name.

Example

In this example all HTML elements with will be red and center-aligned:

You can also specify that only specific HTML elements should be affected by a class.

Example

In this example only

elements with will be red and center-aligned:

HTML elements can also refer to more than one class.

Example

In this example the

element will be styled according to and to

This paragraph refers to two classes.

Note: A class name cannot start with a number!

The CSS Universal Selector

The universal selector (*) selects all HTML elements on the page.

Example

The CSS rule below will affect every HTML element on the page:

The CSS Grouping Selector

The grouping selector selects all the HTML elements with the same style definitions.

Look at the following CSS code (the h1, h2, and p elements have the same style definitions):

h2 text-align: center;
color: red;
>

p text-align: center;
color: red;
>

It will be better to group the selectors, to minimize the code.

To group selectors, separate each selector with a comma.

Example

In this example we have grouped the selectors from the code above:

All CSS Simple Selectors

Selector	Example	Example description
#id	#firstname	Selects the element with >
.class	.intro	Selects all elements with >
element.class	p.intro	Selects only elements with >
*	*	Selects all elements
element	p	Selects all elements
element,element.	div, p	Selects all elements and all elements

Источник